FORKLIFT TIRES
PRESS ON
RESILIENT
TRA RESILIENT SPECS
PNEUMATIC/AIR
MOLDED ON TIRES
AIRCRAFT RETREADS

SKID LOADER TIRES
PNEUMATIC/AIR
SEMI-PNEUMATIC
MOLDED ON TIRES
AIRCRAFT RETREADS

LOADER TIRES
SEMI-PNEUMATIC
AIRCRAFT RETREADS
TIRE CODES
SIZE EXPLAINED

PRINCETON/PIGGY-BACK

BOOMLIFTS/ TELEHANDLER
CLAWDADDY JR
MOLDED ON TIRES

UTILITY/GOLF & BAGGAGE CART
MAN-TOTER

TRACKS OTT & DEPICTATED
DEDICATED-RUBBER
RUBBER OTT
STEEL & RUBBER PADDED
CARE FOR TRACKS

CONSTRUCTION
SKID LOADER TIRES
LOADER TIRES
TRACKS OTT & DEDICATED
AIRCRAFT RETREADS

LUMBER YARD
NEXTIRE
DIAMOND
MONARCH/BERGOUGNAN
SENTRY
TRA RESILIENT SPECS
PNEUMATIC/AIR

NEW WHEELS/ RIMS
WHEEL MEASUREMENTS
HOW TO MEASURE

TIRE CHAINS

FLAT PROOFING

INTERNATIONAL


Terms & Conditions
Privacy Policy

Forklift Tires: Resilient
TRA Specs
 

Solid Tires for use on Pneumatic Tier Rim Contours
For use on Counterbalanced Lift Trucks
For use on Smooth Floors and Runways
Tire and Rim Association Standard

 
Maximum Tire
Maximum Tire Load Rating (Lbs)
Tire Sizes
Section Width (Inches)
Outside Diameter (Inches)
Load Wheel (6 MPH)
Load Wheel (10 MPH)
 
500 x 8/3.0
5.75
18.46
1,935
600 x 9/4.0
6.90
21.46
4,230
3,065
21 x 8 - 9/7.0
8.16
21.06
6,190
4,480
23 x 8-10/6.5
8.00
22.88
7,290
5,280
23 x 9 - 10/6.50
8.86
23.43
7,525
5,450
650 x 10/5.0
7.00
23.50
5,810
4,210
700 x 12/5.0
7.57
26.88
6,640
4,810
23 x 10 - 12/8.0
10.10
23.50
8,820
6,385
700 x 15/5.5
8.05
29.88
7,905
5,725
700 x 15/6.5
8.05
29.88
9,340
6,765
825 x 15/5.5
9.30
33.36
9,200
6,665
825 x 15/6.5
9.30
33.36
10,875
7,875
815 x 15/7.0
8.70
27.80
8,360
6,055
10.00 x 20/6.5
10.95
42.23
13,825
10,010
10.00 x 20/8.0
10.95
42.23
17,015
12,320
12.00 x 20/8.0
12.40
45.10
18,605
13,475
12.00 x 20/10.0
12.40
45.10
23,255
16,840
14.00 x 24/8.0
14.75
53.84
22,500
16,295
14.00 x 24/10.0
14.75
53.84
26,130
20,365
250 x 15/7.0
9.84
28.94
9,615
6,960
250 x 15/7.5
9.84
28.94
10,300
7,460
300 x 15/8.0
12.75
33.00
13,190
9,550
 
* Section width of tire may be substantially less than the dimensions shown.
** Outside Diameter Tolerance = + 0% -5%
Taken from the Tire and Rim Association Inc. book 1997